Unifiber allows direct application on to fibreglass/gel coat as a key coating, which is applied at a low thickness, for good adhesion to fibreglass where a one-component system is required. Unifiber is also recommended as an intermediate coat between epoxies and two-component topcoats. Unifiber can be over coated with one-component enamel or antifouling for above and below the water line.
| Application method : | Brush, Roller, Spray |
| Thinning % : | |
| Brush-Roller : | 0-5 % Thinner 765 |
| Spray : | 10-20% Thinner 765 |
| Recommended Thickness : | 15 dry microns per coat |
| Theoretical coverage: | 10 m2 per litre |
| Colours: | Light green |
| Packaging Size: | 750ml, 2.5L |