.                       .

 About Us     Contact us    News

 
  
Polistuck - Polyester Surface Filler


Polistuck's easy application allows for a high thickness application, or for light surface levelling. It’s fine mixtures provides for easy of filling for fine surface irregularities. Polistuck surface filler is easy to sandpaper, within 30-60 minutes after application.

Polistuck can be applied directly on to steel, cast iron, GRP/FRP, and hard plastics, for aluminium, brass or zinc a suitable primer is recommended before application. Polistuck can then be over coated with any Skipper’s Line coating system.

Polistuck - marine surface Filler
Features and Benefits

  • Smooth mixture for easy sanding
  • Multiple layer can be applied for higher thickness
    levelling
  • Easy to use
  • Direct application to wood
Product Technical Details:
Area of Use: Below and Above the waterline
Substrate:

Steel
Wood
GRP/FRP
Aluminium
Ferrocement
Plastics

Coverage per Litre: 2 m2 per litre (depending on thickness applied)
Pot Life and mixing Ratio: 3% Sol B - From 0-10ºC = 9-12 mins
2% Sol B - From 11-20ºC = 6-9 mins
1% Sol B - From 20ºC plus  = 6 mins
Application Method: Spatula - ready for use
Touch Dry: 45 minutes at 20ºC
Can be sand papered: after 24 hours at 20ºC
Recoat Time: 3-4 hours at 20ºC

Colour:

Cream
Packaging Size: 250ml kits A+B

* The product information is a general overview, to help when deciding which product to use. Please see the product's technical data sheet for specific information.